Flow Cell Unit, Package 15

Product information

15 flow cell units (FCU) as used in the Gas Endeavour main unit.

Gas enters the water-filled flow cell unit and is trapped until the lifting force is enough to trigger an opening of the flow cell. As the flow cell is opened, the gas is released and a hall sensor, located inside of the main unit, is triggered by the absence of the flow cells tip, which houses a magnet.

Each flow cell unit comes with a specific calibrated value that needs to be entered properly into the software of the main unit.

2毫升细胞用于低gas flows (<1500 ml/j) and 9 ml cells are used for higher gas volume flows (<6000 ml/h).

Includes 15 flow cell units

Note: This item cannot be used on its own. It can only be used as part of the Gas Endeavour (ART NO 12-0000-02 and ART NO 12-0301-02). The FCU alone will not register any data.

For package of 1, 5 and 6 flow cell units, please see flow cell unit (ART NO 12-0302-01OR12-0302-02), flow cell unit, package 5 (ART NO 12-0309-01ORART NO 12-0309-02) and flow cell unit, package 6 (ART NO 12-0307-01OR12-0307-02) respectively.

Specifications

Accessory for

Gas Endeavour

Art no.

12-0303-02

Technical specifications

Working principle: liquid displacement and buoyancy
Measuring resolution: 9 ml or 2 ml
Measuring range 2 ml: 0.2 - 1500 ml/h
Measuring range 9 ml: 1 - 6000 ml/h
Material, Housing: Acrylonitrile butadiene styrene (ABS) + Polycarbonate (PC) blend (Bayblend(r) T45 PG) and Acrylonitrile butadiene styrene (ABS) (Makrolon(r) 6557)
Material, Flow Cell 2ml: Makrolon(r) PC 2405 (Polycaprolactone) and Neodymium NdFeB (NiCuNi coating) magnet (N36)